|
|
Simulation of temperature and airflow in a field distributor with frequency converter
Melechovský, Ondřej ; Maxa, Jiří (referee) ; Ondříček, Adam (advisor)
Presented work deals with heat transfer and its methods. At the beginning thesis describes the theory and the ways of heat transfer with connected quantities and equations. Then it explains the stack effect and impact of temperature on electro technical device. In work is also described ABB driver ACS line and calculation of heat transfer according to IEC 60890 standard. In the practical part there is the calculation of heat transfer in Flow Simulation simulating CFD program solved and finite element method is mentioned. Important part of work is devoted to setting and optimization of simulation. In conclusion are made some changes of construction of driver, dependence on heat transfer is inspected.
|
|
|
Variable geometry of intake and exhaust ports of Wankel engine
Krejčí, Tomáš ; Beran, Martin (referee) ; Zháňal, Lubor (advisor)
The purpose of this thesis is to design the key parameters of the high-powered Walkel engine and to design a chamber side on the base of computed parameters so that it enables variable change of the intake and exhaust port geometry. Consequently, to carry out a flow simulation in both ports in designed chamber side in order to find out its flow character and geometry change reaction.
|
|
|
Thermodynamic model of Wankel engine with output power 11 kW
Drbal, Milan ; Beran, Martin (referee) ; Svída, David (advisor)
The master’s thesis deals with the Wankel rotary engines and their 1D simulations using a thermodynamic simulation software for the piston engines. The necessary steps for creation of the equivalent model of the four-stroke three-cylinder combustion engine are provided. The engine used for the validation model was Aixro XR 50. The data measured on this engine during testing were used to validate the created thermodynamic model. The discharge coefficient calculation of the intake and the exhaust ports is shown. The 11kW engine design is created using validated thermodynamic model.
|
|
|
Derating on the low voltage devices with a thermal trip unit
Dobrovolný, Jakub ; Vetiška, Vojtěch (referee) ; Dostál, Lukáš (advisor)
Electrical devices are secured as not to injure living creatures via electric current and damage or destroy machinery due to the effects of electric current. Circuit breaker is a device responsible for protection of an electrical circuit against damage. The main aim of thesis is the correct function of the thermal trip unit when it exposes to the thermal warming. The thermal trip unit is depended on heating of a bimetal before overcurrent flow. The goal of thesis is temperature and voltage drop profile from measured values. Verification of the measurement is done in SolidWorks Flow Simulation software. According to simulations are determined currents for correct function of the thermal trip unit in different temperatures of an environment. The most important result of the thesis is correct setting of the operating current in the circuit breaker.
|
|
|
Model of a gas pressure regulator
Bartková, Tamara ; Tuhovčák, Ján (referee) ; Elcner, Jakub (advisor)
This bachelor thesis is focused on creating and verifying functionality of computing 3D model of a gas pressure regulator. The work contains review of different types of regulators and safety features, including descriptions of their function and main features. It also contains a description verification of the functionality of a gas pressure regulator, including measure of flow – pressure characteristics. The following part contains overview of creating a 3D computing model based on mechanical drawings. Lastly described is comparison of created model with real product.
|
|
|
Applying SolidWorks Flow Simulation for cooling system of the power converter
Matoušek, Patrik ; Vetiška, Vojtěch (referee) ; Dostál, Lukáš (advisor)
Thesis deals with the issue of cooling power converters. It describes the disposition of power converter M50, produced by ELCOM, a.s., and the distribution and origin of heat losses in the converter. The thesis then describes the process of creating a 3D CAD model of the converter in Solidworks and the procedure for heat simulation of the converter in default state and with cooling fan failures using Solidworks Flow Simulation. The thesis then evaluates the results of these simulations, and on their basis it suggests possible improvements in the design of converter‘s cooling system. These improvements are then evaluated in further simulations. The thesis then describes the verification of performed simulations by comparison with a temperature-rise test.
|
|
|
Simulation of Heat Transfer in Low-Voltage Switchboard MNS - Optimization of Heat Transfer into The Switchboard
Czudek, Aleš ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
The thesis includes diagnostics temperature field of industrial low voltage. Place of origin, flow and heat transfer are important aspects in the design of the switchgear, especially in terms of proper equipment layout. The correctness of the design of the switchgear is verified by measuring the practical temperature field during testing or in work mode. To determine the temperature profile, it is necessary to measure the temperature at various points of the switchgear, either contact or contactless method. Measurements are performed on standardized low voltage switchboards, which are located power elements. The goal is to replace costly and time-consuming field testing switchgear efficient simulation of the temperature field mathematical model developed switchboards.
|
|
| |
|
|
The heat build-up of tap-off units of busbar trunking system in relationship to their surfacing.
Forejtník, Jan ; Radil, Lukáš (referee) ; Foral, Štěpán (advisor)
This study is dedicated to the effect of surface modification on lid warming of busbar trunking system BD2 which is manufactured by Siemens company in Mohelnice town (CZ). By using experimental methods, it investigates heat transfer by radiation and natural convection. It evaluates which type of surface modification is more effective by transfer heat. This study uses a method of emisivity comparison and a procedure given in standards for heat up test afterwards. It led to recognition, that various colour shades used on busbar system have similar high emissivity. Smooth colour spraying transfers heat a bit more effectively than rough colour spraying. Outputs of supplementary measurements give basis for numerical simulations in SolidWorks software. Numerical analysis assists to interpret results, for example by sensitivity study of heat transfer depending on emissivity.
|
|
|
Analysis of the distribution of the temperature profile in the furnace brazing using CAE systems
Stručovský, Aleš ; Vyroubal, Petr (referee) ; Maxa, Jiří (advisor)
The aim of this project is using the CAE system to analyze the distribution of the temperature profile brazing furnace DIMA 0180. To create the model is used SolidWorks Premium 2012. The simulation is performed using the Flow Simulation. This work builds on the knowledge diploma thesis by Martin Procházka titled The effect of different heat capacities and components on the longitudinal temperature profile for reflow soldering. We start from the knowledge of heat transfer, especially of heat conduction and radiation, which appear in the furnace.
|
guest ::
